CWBUC-200W Ku-band BUC Upconverter – All-in-One Solid State Amplifier Package for Mission-Critical VSAT Networks

1. Industry-Leading RF Specifications for Full-Scenario High-Power Satellite Uplink

• Complete frequency conversion chain: Accepts 950~1700 MHz IF input and converts signals to 13.75~14.5 GHz Ku-band RF output with built-in 12.8 GHz local oscillator. It supports synchronized 10 MHz external reference clock input, outstanding phase noise performance (-93 dBc/Hz at 100 kHz offset) and third-order intermodulation suppression ≤ -25 dBc to eliminate clutter and signal distortion.
• High gain & high power output: Saturated output power reaches 53 dBm (200W) with nominal gain ≥73 dB. Equipped with 0~20 dB adjustable attenuation in 1 dB fine steps to flexibly match different satellite transponder power limits.
• Stable full-band performance: Amplitude-frequency fluctuation is limited to only 4 dB peak-to-peak across the entire operating band, ensuring distortion-free high-power transmission for HD satellite backhaul, broadband emergency uplink and long-distance communication in mountainous or marine regions.

2. Integrated Waterproof Enclosure, Dual Installation Modes for Flexible Field Deployment

• Dual mounting solutions: Pre-drilled M6 metric threaded holes on the top and side panels enable two installation methods – direct docking with antenna feed via BJ120 waveguide flange, or secure mounting on antenna support poles. Compact dimensions (330mm×200mm×180mm) save valuable space in equipment shelters and vehicle cabins.
• Intelligent temperature-controlled forced air cooling: Built-in multi-speed cooling fans automatically stop below 35°C for noise reduction and run at full speed under high-temperature conditions. Maintain a minimum 50mm clearance around the unit for heat dissipation. Routine fan cleaning every 6 months is required; the manufacturer provides complimentary full-unit deep maintenance every 3 years upon customer request.
• Standardized industrial full set of external interfaces:

3. Web-Based Visual Remote Monitoring, Zero On-Site Visits for Station Management

• Ready-to-use web backend: Default access IP address 192.168.1.4, accessible via any browser without dedicated debugging software.
• Full real-time status dashboard: Displays live gain, RF output power, operating current, internal temperature and current attenuation value for full visibility of equipment health.
• One-click remote parameter configuration: Adjust attenuation (0~20dB), toggle Tx transmit enable switch remotely, and modify network settings including IP address, subnet mask and gateway with one-click save & reboot.
• Automatic fault alarm with standardized error codes via dual-color LED indicator: Steady green light confirms normal locked operation after self-check. Flashing red light delivers tiered fault codes (2 flashes = No transmit enable command; 3 flashes = 10MHz reference loss; 4 flashes = Abnormal AC input voltage; 6 flashes = Over-temperature; 7 flashes = PA module communication failure). The highest priority fault will be displayed if multiple malfunctions occur simultaneously for fast troubleshooting.

4. Standardized Installation & Comprehensive Safety Protection to Avoid Field Failures

Streamlined Power-On & Installation Workflow

Multi-Layer Safety Mechanisms Prevent Equipment Damage & Personnel Hazards

1. No-load transmission prohibition: The RF waveguide must be connected to an antenna or matched high-power load before powering on to prevent dangerous high-power RF radiation and power amplifier burnout. Cross/orthogonal waveguide installation is strictly forbidden.
2. ESD & surge protection: Full metal chassis grounding is required, paired with recommended UPS power supply to defend against lightning surges and unstable grid voltage.
3. Sealed high-voltage internal structure: Precision high-voltage components are enclosed inside the housing. Unauthorized disassembly voids the full warranty; all repair work must be performed exclusively by factory certified technicians.
4. Outdoor waterproof upgrade solution: UV-resistant waterproof tape can be wrapped around all IF, power and monitoring aviation connectors to block moisture and oxidation for long-term outdoor deployment.

5. Full-Cycle Manufacturer Warranty & End-To-End Technical Support for Bulk Engineering Orders

• Manufacturer warranty coverage: Free repair service is offered within the warranty period for failures caused by raw material or manufacturing defects. Damage from improper installation, unauthorized disassembly or extreme environmental stress is excluded from warranty terms.
• Full lifecycle technical support: Pre-sales parameter selection and installation scheme consultation, full installation drawings & operation manuals supplied mid-project, remote on-demand debugging guidance post-delivery, and factory return repair service for faulty units.
• Customized bulk procurement solutions: Specialized packages for radio & television system integrators, communication contractors and government emergency departments, including matched cables, mounting accessories and on-site technical guidance upon request.

6. Wide Application Scenarios for Multiple Communication Industries

Closing Promotion Note